Hi, When I run above test case where it shows below mentioned error.Could you tell me how to sort out that ? Thanks.
Note : App V 1.7
Result Message:
Castle.MicroKernel.Handlers.HandlerException : Can't create component 'Joshi.IP.MultiTenancy.Demo.TenantDemoDataBuilder' as it has dependencies to be satisfied.
'Joshi.IP.MultiTenancy.Demo.TenantDemoDataBuilder' is waiting for the following dependencies:
- Service 'Joshi.IP.IAppFolders' which was not registered.
Result StackTrace:
at Castle.MicroKernel.Handlers.DefaultHandler.AssertNotWaitingForDependency()
at Castle.MicroKernel.Handlers.DefaultHandler.ResolveCore(CreationContext context, Boolean requiresDecommission, Boolean instanceRequired, Burden& burden)
at Castle.MicroKernel.Handlers.DefaultHandler.Resolve(CreationContext context, Boolean instanceRequired)
at Castle.MicroKernel.Handlers.AbstractHandler.Resolve(CreationContext context)
at Castle.MicroKernel.Resolvers.DefaultDependencyResolver.ResolveFromKernelByType(CreationContext context, ComponentModel model, DependencyModel dependency)
at Castle.MicroKernel.Resolvers.DefaultDependencyResolver.ResolveFromKernel(CreationContext context, ComponentModel model, DependencyModel dependency)
at Castle.MicroKernel.Resolvers.DefaultDependencyResolver.ResolveCore(CreationContext context, ISubDependencyResolver contextHandlerResolver, ComponentModel model, DependencyModel dependency)
at Castle.MicroKernel.Resolvers.DefaultDependencyResolver.Resolve(CreationContext context, ISubDependencyResolver contextHandlerResolver, ComponentModel model, DependencyModel dependency)
at Castle.MicroKernel.ComponentActivator.DefaultComponentActivator.CreateConstructorArguments(ConstructorCandidate constructor, CreationContext context)
at Castle.MicroKernel.ComponentActivator.DefaultComponentActivator.Instantiate(CreationContext context)
at Castle.MicroKernel.ComponentActivator.DefaultComponentActivator.InternalCreate(CreationContext context)
at Castle.MicroKernel.ComponentActivator.AbstractComponentActivator.Create(CreationContext context, Burden burden)
at Castle.MicroKernel.Lifestyle.AbstractLifestyleManager.CreateInstance(CreationContext context, Boolean trackedExternally)
at Castle.MicroKernel.Lifestyle.AbstractLifestyleManager.Resolve(CreationContext context, IReleasePolicy releasePolicy)
at Castle.MicroKernel.Handlers.DefaultHandler.ResolveCore(CreationContext context, Boolean requiresDecommission, Boolean instanceRequired, Burden& burden)
at Castle.MicroKernel.Handlers.DefaultHandler.Resolve(CreationContext context, Boolean instanceRequired)
at Castle.MicroKernel.Handlers.AbstractHandler.Resolve(CreationContext context)
at Castle.MicroKernel.DefaultKernel.ResolveComponent(IHandler handler, Type service, IDictionary additionalArguments, IReleasePolicy policy)
at Castle.MicroKernel.DefaultKernel.Castle.MicroKernel.IKernelInternal.Resolve(Type service, IDictionary arguments, IReleasePolicy policy)
at Castle.MicroKernel.DefaultKernel.Resolve(Type service, IDictionary arguments)
at Castle.Windsor.WindsorContainer.Resolve[T]()
at Abp.Dependency.IocManager.Resolve[T]()
at Abp.TestBase.AbpIntegratedTestBase.Resolve[T]()
Hi Halil, Can you give us a guidance for implementing angular unit testing with the Jasmine ? I know it is not related to the ASP.net Zero. But it's really nice if we can have such a sample for it also.If you can give us an example how to do it with the Phone book app,it's really appreciated.Later you can add that example to this page also : [http://www.aspnetzero.com/Documents/Developing-Step-By-Step]). Hope you'll give feedback for this.Thanks.
I have tried to install latest Abp 0.7.6 nugget package into my Application layer.But it gives below mentioned error.Could you tell me why ? Thanks in advance.
Install-Package : Could not install package 'Abp 0.7.6.0'. You are trying to install this package into a project that targets
'.NETFramework,Version=v4.5.1', but the package does not contain any assembly references or content files that are compatible with that
framework. For more information, contact the package author.
At line:1 char:1
+ Install-Package Abp
+ ~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Install-Package], InvalidOperationException
+ FullyQualifiedErrorId : NuGetCmdletUnhandledException,NuGet.PowerShell.Commands.InstallPackageCommand
Could you tell me how to update all the 'ASP.NET Boilerplate Nuget Packages' at once ? Let's say on the latest release where it's having around 10 Nugets. So without updating them one by one where is there any method to update them all at once ? Thanks in advance.
Could you tell me how can I know about the latest releases of the ASP.net Boilerplate ? As an example about the ver : ABP v0.7.6.0 ? Which steps should I follow to notify me about it through email ? Thanks in advance.
AppNavigationProvider.cs
.AddItem(new MenuItemDefinition(
PageNames.App.Tenant.Dashboard,
L("Reports"),
icon: "glyphicon glyphicon-eye-open",
requiredPermissionName: AppPermissions.Pages_Tenant_Dashboard
).AddItem(new MenuItemDefinition(
PageNames.App.Tenant.PropertyListingsReport,
L("PropertyListings"),
url: "tenant.propertyListingsReport",
icon: "glyphicon glyphicon-eye-open")
).AddItem(new MenuItemDefinition(
PageNames.App.Tenant.BpoReports,
L("BpoReports"),
icon: "glyphicon glyphicon-eye-open")
.AddItem(new MenuItemDefinition(
PageNames.App.Tenant.PaymentReceived,
L("PaymentReceived"),
url: "tenant.PaymentReceived",
icon: "glyphicon glyphicon-eye-open")
).AddItem(new MenuItemDefinition(
PageNames.App.Tenant.BankReport,
L("BankReport"),
url: "tenant.BankReport",
icon: "glyphicon glyphicon-eye-open")
))
)
app.js
$stateProvider.state('tenant.propertyListingsReport', {
url: '/propertyListingsReport',
templateUrl: '~/App/tenant/views/reports/propertyListings.cshtml',
menu: 'PropertyListingsReport.Tenant'
});
$stateProvider.state('tenant.PaymentReceived', {
url: '/PaymentReceived',
templateUrl: '~/App/tenant/views/reports/propertyListings.cshtml',//I'll change this later
menu: 'PaymentReceived.Tenant'
});
$stateProvider.state('tenant.BankReport', {
url: '/BankReport',
templateUrl: '~/App/tenant/views/reports/propertyListings.cshtml',//I'll change this later
menu: 'BankReport.Tenant'
});
Please see the image here for more details : [http://imgur.com/s2W9oT3])
Could you suggest a good reporting tool which I can use with the Asp.netboilerplate SPA app ? I can use Angular Grid for some scenarios.But on the other use cases where I need to use some advance reporting tool like crystal report.Could you tell me which one is suitable for it with the AngularJs ? Thanks in advance.
public async Task<int> CreateOwnerDetailAsync(CreateOrEditOwnerDetailInput input)
{
var ownerDetail = input.OwnerDetail.MapTo<OwnerDetail>();
var ownerDetailId = await _ownerDetailRepository.InsertAndGetIdAsync(ownerDetail);
return ownerDetailId;
}
public async Task<int?> EditOwnerDetailAsync(CreateOrEditOwnerDetailInput input)
{
var ownerDetail = await _ownerDetailRepository.FirstOrDefaultAsync(p => p.Id == input.OwnerDetail.Id);
input.OwnerDetail.MapTo(ownerDetail);
await _ownerDetailRepository.UpdateAsync(ownerDetail);
return input.OwnerDetail.Id;
}
public class CreateOrEditOwnerDetailInput : IInputDto
{
[Required]
public OwnerDetailEditDto OwnerDetail { get; set; }
}
[AutoMap(typeof(OwnerDetail))]
public class OwnerDetailEditDto
{
public const int MaxLength = 50;
public int? Id { get; set; }
[Required]
[MaxLength(MaxLength)]
public string LastName { get; set; }
[Required]
public OwnerContactDetailDto ContactDetail { get; set; }
[Required]
public AdditionalAddressDto AdditionalAddress { get; set; }
}
[Table("IpOwnerDetails")]
public class OwnerDetail : FullAuditedEntity
{
public const int MaxLength = 50;
[Required]
[MaxLength(MaxLength)]
public virtual string LastName { get; set; }
[ForeignKey("AdditionalAddressId")]
public virtual AdditionalAddress AdditionalAddress { get; set; }
public virtual int AdditionalAddressId { get; set; }
[ForeignKey("ContactDetailId")]
public virtual ContactDetail ContactDetail { get; set; }
public virtual int ContactDetailId { get; set; }
}
public class OwnerContactDetailDto : FullAuditedEntityDto
{
public const int NumberMaxLength = 20;
[Required]
[MaxLength(NumberMaxLength)]
public string MainPhoneNumber { get; set; }
[MaxLength(NumberMaxLength)]
public string CellPhoneNumber { get; set; }
}
public class AdditionalAddressDto : FullAuditedEntityDto
{
public const int MaxLength = 50;
[Required]
[MaxLength(MaxLength)]
public string StreetNumber { get; set; }
[Required]
[MaxLength(MaxLength)]
public string StreetName { get; set; }
}
Custom mapping :
private static void CreateMappingsInternal()
{
Mapper.CreateMap<AdditionalAddress, AdditionalAddressDto>()
.ReverseMap()
.ForMember(additionalAddress => additionalAddress.Id, options => options.Ignore());
Mapper.CreateMap<ContactDetail, OwnerContactDetailDto>()
.ReverseMap()
.ForMember(contactDetail => contactDetail.Id, options => options.Ignore());
}
Q : I can create an 'owner detail' by using above code.But when I try to use same "Save" button to edit the record it gives below exception.I have included more details on the attached image.Please see that too.Could you tell me why this is happening ? Thanks in advance.
Note : After this line " input.OwnerDetail.MapTo(ownerDetail);" inside the "EditOwnerDetailAsync()" method where "AdditionalAddress" and "ContactDetail " objects are changed it to "null".Could you tell me why ?
Note 2 : I have used custom mappings hence this error "System.InvalidOperationException: The property 'Id' is part of the object's key information and cannot be modified.".Now that error is not there.But it gives above mentioned error now.
Image : [http://imgur.com/a/GRdw6])
The strange thing here is when I bring the debug pointer back to the " input.OwnerDetail.MapTo(ownerDetail);" line (2nd time) then it fills data for the "AdditionalAddress" and "ContactDetail " objects.How can It be happend ? Please tell me :?:
Exception :
ERROR 2015-11-19 20:58:22,258 [5 ] lers.Filters.AbpExceptionFilterAttribute - System.ArgumentNullException: Value cannot be null.
Parameter name: entity
at System.Data.Entity.Utilities.Check.NotNull[T](T value, String parameterName)
at System.Data.Entity.DbSet`1.Attach(TEntity entity)
at Abp.EntityFramework.Repositories.EfRepositoryBase`3.AttachIfNot(TEntity entity)
at Castle.Proxies.EfRepositoryBase`2Proxy_18.AttachIfNot_callback(AdditionalAddress entity)
at Castle.Proxies.Invocations.EfRepositoryBase`3_AttachIfNot_28.InvokeMethodOnTarget()
at Castle.DynamicProxy.AbstractInvocation.Proceed()
at Abp.Domain.Uow.UnitOfWorkInterceptor.Intercept(IInvocation invocation)
at Castle.DynamicProxy.AbstractInvocation.Proceed()
at Castle.Proxies.EfRepositoryBase`2Proxy_18.AttachIfNot(AdditionalAddress entity)
at Abp.EntityFramework.Repositories.EfRepositoryBase`3.UpdateAsync(TEntity entity)
at Castle.Proxies.EfRepositoryBase`2Proxy_18.UpdateAsync_callback(AdditionalAddress entity)
at Castle.Proxies.Invocations.EfRepositoryBase`3_UpdateAsync_28.InvokeMethodOnTarget()
at Castle.DynamicProxy.AbstractInvocation.Proceed()
at Abp.Domain.Uow.UnitOfWorkInterceptor.Intercept(IInvocation invocation)
at Castle.DynamicProxy.AbstractInvocation.Proceed()
at Castle.Proxies.EfRepositoryBase`2Proxy_18.UpdateAsync(AdditionalAddress entity)
at Joshi.IP.OwnerDetails.OwnerDetailAppService.<EditOwnerDetailAsync>d__e.MoveNext() in d:\Freelance Work\Nipun-SPA\SPA\island\Joshi.IP.Application\OwnerDetails\OwnerDetailAppService.cs:line 65
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Joshi.IP.OwnerDetails.OwnerDetailAppService.<CreateOrEditOwnerDetailAsync>d__0.MoveNext() in d:\Freelance Work\Nipun-SPA\SPA\island\Joshi.IP.Application\OwnerDetails\OwnerDetailAppService.cs:line 34
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Abp.Threading.InternalAsyncHelper.<AwaitTaskWithPostActionAndFinallyAndGetResult>d__10`1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Abp.Threading.InternalAsyncHelper.<AwaitTaskWithFinallyAndGetResult>d__c`1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at System.Threading.Tasks.TaskHelpersExtensions.<CastToObject>d__3`1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at Abp.Extensions.ExceptionExtensions.ReThrow(Exception exception)
at Abp.WebApi.Controllers.Dynamic.Selectors.DynamicHttpActionDescriptor.<ExecuteAsync>b__0(Task`1 task)
at System.Threading.Tasks.ContinuationResultTaskFromResultTask`2.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at System.Web.Http.Controllers.ApiControllerActionInvoker.<InvokeActionAsyncCore>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at System.Web.Http.Controllers.ActionFilterResult.<ExecuteAsync>d__2.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at System.Web.Http.Controllers.AuthenticationFilterResult.<ExecuteAsync>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at System.Web.Http.Controllers.ExceptionFilterResult.<ExecuteAsync>d__0.MoveNext()
public async Task<int> CreatePropertyAsync(CreateOrEditPropertyInput input)
{
var property = input.Property.MapTo<Property>();
var propertyId = await _propertyRepository.InsertAndGetIdAsync(property);
return propertyId;
}
public async Task<int?> EditPropertyAsync(CreateOrEditPropertyInput input)
{
var property = await _propertyRepository.FirstOrDefaultAsync(p => p.Id == input.Property.Id);
input.Property.MapTo(property);
await _propertyRepository.UpdateAsync(property);
return input.Property.Id;
}
public class CreateOrEditPropertyInput : IInputDto
{
[Required]
public PropertyEditDto Property { get; set; }
}
[AutoMap(typeof(Property))]
public class PropertyEditDto
{
public const int MaxLength = 50;
public int? Id { get; set; }
public bool IsVacant { get; set; }
public bool IsPropertyToConsider { get; set; }
[Required]
[MaxLength(MaxLength)]
public string Dist { get; set; }
[Required]
[MaxLength(MaxLength)]
public string Sec { get; set; }
}
JS
vm.init = function () {
propertyService.getPropertyForEdit({
id: vm.property.id
}).success(function (result) {
vm.property = result.property;
});
};
public async Task<GetPropertyForEditOutput> GetPropertyForEdit(NullableIdInput<int> input)
{
var output = new GetPropertyForEditOutput();
if (!input.Id.HasValue)//create
{
output.Property = new PropertyEditDto();
}
else //edit
{
var property = await _propertyRepository.FirstOrDefaultAsync(p => p.Id == input.Id.Value);
output.Property = property.MapTo<PropertyEditDto>();
}
return output;
}
public class GetPropertyForEditOutput : IOutputDto
{
public PropertyEditDto Property { get; set; }
}
JS
//to save Property
function createOrEditProperty() {
vm.saving = true;
propertyService.createOrEditPropertyAsync({ property: vm.property }).success(function (data) {
vm.property.id = data;
abp.notify.info(app.localize('SavedSuccessfully'));
}).finally(function () {
vm.saving = false;
});
}
Q : Using above code snippets where I can "Create" and "Edit" the property correctly.App's UI is having many tabs and each and every tab is having "Save" button.Hence after creating the property where user can do any change again and can press the "Save" button again.The problem comes on that moment.It gives "An internal error occurred during your request!" error box when executes below line inside the "EditPropertyAsync()" method.This is the line :
input.Property.MapTo(property);
. Could you tell me why this is happening ? This is working fine when I use the "Edit" button.The problem occurs when I try to change the record after Creating it on the same screen without going to the "Edit" button.
Note : After creating the record,it returned the newly created property id back to the ui and by using that id where I decide it to be edited record.Then it executes "EditPropertyAsync()" method.That is the way I did it when user tries to use "Save" button again on the same screen without going to the Edit button. This time only it gives above mentioned error.
Note 2 : I have found out this from log file :
Source value:
0 ---> System.InvalidOperationException: The property 'Id' is part of the object's key information and cannot be modified.
Complete Exception :
ERROR 2015-11-19 10:38:16,338 [16 ] lers.Filters.AbpExceptionFilterAttribute - AutoMapper.AutoMapperMappingException:
Mapping types:
Int32 -> Int32
System.Int32 -> System.Int32
Destination path:
Property.Address.Address.Id.Id
Source value:
0 ---> System.InvalidOperationException: The property 'Id' is part of the object's key information and cannot be modified.
at System.Data.Entity.Core.Objects.EntityEntry.VerifyEntityValueIsEditable(StateManagerTypeMetadata typeMetadata, Int32 ordinal, String memberName)
at System.Data.Entity.Core.Objects.EntityEntry.GetAndValidateChangeMemberInfo(String entityMemberName, Object complexObject, String complexObjectMemberName, StateManagerTypeMetadata& typeMetadata, String& changingMemberName, Object& changingObject)
at System.Data.Entity.Core.Objects.EntityEntry.EntityMemberChanging(String entityMemberName, Object complexObject, String complexObjectMemberName)
at System.Data.Entity.Core.Objects.EntityEntry.EntityMemberChanging(String entityMemberName)
at System.Data.Entity.Core.Objects.ObjectStateEntry.System.Data.Entity.Core.Objects.DataClasses.IEntityChangeTracker.EntityMemberChanging(String entityMemberName)
at System.Data.Entity.DynamicProxies.Address_DC03C9817912E18A8FAA931110EEEF10FBB1519A7553CF5CAA7822ECD0C0FCBF.EntityMemberChanging(String )
at System.Data.Entity.DynamicProxies.Address_DC03C9817912E18A8FAA931110EEEF10FBB1519A7553CF5CAA7822ECD0C0FCBF.set_Id(Int32 )
at lambda_method(Closure , Object , Object )
at AutoMapper.Internal.PropertyAccessor.SetValue(Object destination, Object value)
at AutoMapper.Mappers.TypeMapObjectMapperRegistry.PropertyMapMappingStrategy.AssignValue(PropertyMap propertyMap, Object mappedObject, Object propertyValueToAssign)
at AutoMapper.Mappers.TypeMapObjectMapperRegistry.PropertyMapMappingStrategy.MapPropertyValue(ResolutionContext context, IMappingEngineRunner mapper, Object mappedObject, PropertyMap propertyMap)
--- End of inner exception stack trace ---
at AutoMapper.Mappers.TypeMapObjectMapperRegistry.PropertyMapMappingStrategy.MapPropertyValue(ResolutionContext context, IMappingEngineRunner mapper, Object mappedObject, PropertyMap propertyMap)
at AutoMapper.Mappers.TypeMapObjectMapperRegistry.PropertyMapMappingStrategy.Map(ResolutionContext context, IMappingEngineRunner mapper)
at AutoMapper.Mappers.TypeMapMapper.Map(ResolutionContext context, IMappingEngineRunner mapper)
at AutoMapper.MappingEngine.AutoMapper.IMappingEngineRunner.Map(ResolutionContext context)
at AutoMapper.Mappers.TypeMapObjectMapperRegistry.PropertyMapMappingStrategy.MapPropertyValue(ResolutionContext context, IMappingEngineRunner mapper, Object mappedObject, PropertyMap propertyMap)
at AutoMapper.Mappers.TypeMapObjectMapperRegistry.PropertyMapMappingStrategy.Map(ResolutionContext context, IMappingEngineRunner mapper)
at AutoMapper.Mappers.TypeMapMapper.Map(ResolutionContext context, IMappingEngineRunner mapper)
at AutoMapper.MappingEngine.AutoMapper.IMappingEngineRunner.Map(ResolutionContext context)
at AutoMapper.MappingEngine.MapCore(Object source, Object destination, Type sourceType, Type destinationType, MappingOperationOptions options)
at AutoMapper.MappingEngine.Map[TSource,TDestination](TSource source, TDestination destination, Action`1 opts)
at AutoMapper.MappingEngine.Map[TSource,TDestination](TSource source, TDestination destination)
at AutoMapper.Mapper.Map[TSource,TDestination](TSource source, TDestination destination)
at Abp.AutoMapper.AutoMapExtensions.MapTo[TSource,TDestination](TSource source, TDestination destination)
at Joshi.IP.IpProperties.PropertyAppService.<EditPropertyAsync>d__11.MoveNext() in d:\Freelance Work\Nipun-SPA\SPA\island\Joshi.IP.Application\IpProperties\PropertyAppService.cs:line 77
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Joshi.IP.IpProperties.PropertyAppService.<CreateOrEditPropertyAsync>d__5.MoveNext() in d:\Freelance Work\Nipun-SPA\SPA\island\Joshi.IP.Application\IpProperties\PropertyAppService.cs:line 52
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Abp.Threading.InternalAsyncHelper.<AwaitTaskWithPostActionAndFinallyAndGetResult>d__10`1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Abp.Threading.InternalAsyncHelper.<AwaitTaskWithFinallyAndGetResult>d__c`1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at System.Threading.Tasks.TaskHelpersExtensions.<CastToObject>d__3`1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at Abp.Extensions.ExceptionExtensions.ReThrow(Exception exception)
at Abp.WebApi.Controllers.Dynamic.Selectors.DynamicHttpActionDescriptor.<ExecuteAsync>b__0(Task`1 task)
at System.Threading.Tasks.ContinuationResultTaskFromResultTask`2.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at System.Web.Http.Controllers.ApiControllerActionInvoker.<InvokeActionAsyncCore>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at System.Web.Http.Controllers.ActionFilterResult.<ExecuteAsync>d__2.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at System.Web.Http.Controllers.AuthenticationFilterResult.<ExecuteAsync>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at System.Web.Http.Controllers.ExceptionFilterResult.<ExecuteAsync>d__0.MoveNext()
I have above question due to I couldn't find out the drop down box which is having Material design UI features as shown below.Do I need to add any other references to get those effects ? But on text boxes where those having that effects.Hope you'll give feedback for this. Thanks in advance.
Material design drop down UI
<a class="postlink" href="https://material.angularjs.org/latest/demo/select">https://material.angularjs.org/latest/demo/select</a>